Elizabeth Barrette (ysabetwordsmith) wrote,
Elizabeth Barrette
ysabetwordsmith

  • Mood:

Little House

I enjoyed this post about building a very small house.  Not everyone needs large amounts of living space.
Tags: community
Subscribe

  • Post a new comment

    Error

    default userpic

    Your IP address will be recorded 

    When you submit the form an invisible reCAPTCHA check will be performed.
    You must follow the Privacy Policy and Google Terms of use.
  • 16 comments
... *!!!!*

*___*

I admire your theories and would like to subscribe to your newsletter.
I'd be honored. I've always wanted to live in a house with a turret; I just hadn't figured out the best way to put one in. I started with an A-frame house, with an attached tower, and my ideas have been evolving from there.

Though all those power-independence items would get a little costly. Solar roofing tiles and a wind generator would run ~$2k-3k together. The other two items would total ~$4k (those fuel cells are pretty expensive right now). Fortunately, a Tesla disc-based water pump would be a reasonable hobby project, if you had a good workshop available; just run the water through it instead of pumping the water, and attach a generator to the drive shaft. Still ~$200 for raw stock, parts, labor, and machine tool access.

Then again, you can build a wind generator from a pair of hula hoops and some cloth, hung on a pole and attached to a car alternator. Just gotta use the right charging circuit.
How do you build a wind generator from hula hoops and cloth?
I can't find any references for it; they must be buried right now. Anyway: Start with a pole on which you will hang your vertical turbine, two hula hoops, and cloth. Just as with a hanging wind ornament, you sew strips of cloth, binding the hoops together, and each strip has a single twist in it (in the same direction). Next you choose the top hoop, and tie cords/spokes from the rim to the center, so you can hang it on the pole tied to a frictionless bearing. I don't recall whether the bottom hoop is also tied around the pole; I think so.

Anyway, that is your turbine. You then link the turbine to a car alternator (using a gearbox or geared transmission), which provides the current. From there, you add an electronic charging circuit so your batteries receive what they need and no more.

dv_girl made one for Burning Man last year.